Select a Country or Region

Aluminium strip
aluminium strip roll
aluminium strip roll supplier
aluminium strip supplier
aluminium strip roll in China
LANREN's aluminium strip roll
Aluminium strip
aluminium strip roll
aluminium strip roll supplier
aluminium strip supplier
aluminium strip roll in China
LANREN's aluminium strip roll

Mill Finish Aluminium Strip Roll

  • Lanren aluminum can offer a full range of Pure Grade Mill Finish Aluminum strips. We always buy National standard ingot for production, so that our products are following international quality standards. We produce aluminum strips in a wide variety of alloys, including clad composites. Our aluminum alloy strip bars stock can be produced in standard dimensions or custom-made to your special requirements. We manufacture in compliance with the main international specifications, and tighter tolerances or custom tempers are available upon request.
  • Alloy: 1050 1060 1100 1200 3003 3004 3105 5005 5052 8011
  • Temper: O H12 H14 H16 H18 H22 H24 H32 T6 T651 T8
  • Thickness: 0.15-4.00mm
  • Width: 10mm-915mm
  • Coil ID: 150mm 305mm 405mm 505mm
Share to

Product Description

The raw material of aluminum strip is pure aluminium or aluminium alloy cast-rolled into an aluminium coil or hot-rolled aluminium coil, which is rolled into a thin-plate aluminium coil of different thickness and width by the cold rolling mill. According to different purposes, it is cut into aluminium strips of different widths longitudinally by a slitting machine.

Aluminium strip is an aluminium deep-processed product formed by aluminum coil slitting. It is an important raw material in the industry.

According to the different alloying elements contained in the aluminium strip, the aluminium strip and the aluminium plate are also divided into 8 series. However, the commonly used series are 1000, 3000, 5000 and 8000 series.

According to the different annealing states of the aluminium strip, the aluminum strip can be divided into full soft (O state) semi-hard (H24) and full hard (h18). The most commonly used one should belong to the all-soft series, because the O state is easier to stretch and bend.

Lanren Aluminium occupies an area of nearly 50,000 square meters and has more than 300 employees, and Lanren has become a comprehensive aluminum fabrication enterprise for its production scale, advanced equipment,full-ranged product varieties in China.

 

Mill Finish Aluminium Strip Roll Introduction

 

 

Application of Aluminium Strip Roll

There are many uses of aluminium tape, such as cables, optical cables, transformers, heaters, blinds and so on.

  • 1060: Where high corrosion resistance and formability are required, but not high strength requirements, chemical equipment is its typical use.
  • 1100: It is used for processing parts that require good formability and high corrosion resistance but do not require high strength, such as chemical products, food industry equipment and storage containers, thin plate processing parts, deep drawing or spinning concave vessels, Welding parts, heat exchangers, printed boards, nameplates, reflectors.
  • 3004 Plate, thick plate, stretched tube: As long as the extruded tube is used for the body of the all-aluminum can, it requires higher parts than 3003 alloy, chemical product production and storage devices, sheet processing parts, building baffles, cable ducts, sewers, and various lighting components.
  • 3003 board: Strip. Foil. Thick plates, stretched tubes. Squeeze the tube. type. Baton. Wire. Cold processed bars, cold processed wires, rivet wires, foils, and heat sink materials are mainly used to process parts that require good forming properties, high corrosion resistance, or good weld-ability or those that require these properties. A workplace with higher strength than 1series alloys, such as tanks and tanks for transporting liquids, pressure tanks, storage devices, heat exchangers, chemical equipment, aircraft fuel tanks, oil ducts, reflectors, kitchen equipment, washing machines cylinders, Rivets, welding wire.
  • 5052: This alloy has good forming and processing properties, corrosion resistance, candle resistance, fatigue strength and medium static strength. It is used to manufacture aircraft fuel tanks, fuel pipes, and traffic vehicles, meters, street lamp brackets and rivets, hardware products, etc.

 

Application of Aluminium Strip Roll

 

 

Advantages of Aluminium Strip Roll

  • It has the advantages of small size, lightweight, good insulation performance, flame retardant, no pollution, small partial discharge, moisture resistance, stable and reliable operation, low noise, low maintenance cost, etc.
  • Aluminum strip has good anti-rust ability, good form-ability, weld-ability and corrosion resistance.
  • Use high-quality aluminium and adopt advanced composite technology.
  • In the four-season climate, changes in wind pressure, temperature, humidity and other factors will not cause bending, deformation, expansion, etc.
  • It is often used in humid environments such as outer packaging, mechanical parts, refrigerators, and air-conditioning ventilation ducts.
  • It is widely used in high-rise buildings, underground facilities, commercial centers, residential areas, hotels and wet coastal areas.

 

 

Specification of Aluminium Strip Roll

(1) Aluminium strip detail

Product aluminium Strip
Alloy 1050  1060  1100  1200  3003  3004  3105   5005  5052  8011 
Temper O H12 H14  H16  H18  H22  H24  H32 T6  T651  T8
Thickness 0.15-4.00mm
Width 10mm-915mm
Coil ID 150mm 305mm 405mm 505mm
Lead Time Within 30-45 days after receiving deposit
Packing Export standard packaging: wooden pallet + cardboard + steel bar fixed
Material Using high-tech machinery utilizing premium grade aluminium Coil.
Surface Bright & smooth surface, free from defects like white rust, oil patch, edge damage.

 

(2) Chemical Composition (%) 

Alloy Si Fe Cu Mn Mg Cr Zn Ti V Others Al
1100 Si+Fe:0.95 0.05-0.2 0.05 / / 0.1 / / 0.15 99
1050 0.25 0.4 0.05 0.05 0.05 / 0.05 0.03 0.05 0.03 99.5
1060 0.25 0.35 0.05 0.03 0.03 / 0.05 0.03 0.05 0.03 99.6
1070 0.2 0.25 0.04 0.03 0.03 / 0.04 0.03 / 0.03 99.7
2014 0.5-1.2 0.7 3.9-5.0 0.4-1.2 0.2-0.8 0.1 0.25 0.15 / 0.15 Others
3003 0.6 0.7 0.05-0.20 1.0-1.5 / / 0.1 / / 0.15 Others
4047 11月13日 0.8 0.3 0.15 0.1 / 0.2 / / 0.15 Others
5052 0.25 0.4 0.1 0.1 2.2-2.8 0.15-0.35 0.1 / / 1.15 Others
6061 0.4-0.8 0.7 0.15-0.4 0.15 0.8-1.2 0.04-0.35 0.25 0.15 / 0.15 Others
7075 0.4 0.5 1.2-2.0 0.2 2.1-2.9 0.18-0.28 5.1-6.1 0.2 / 0.15 Others
8011 0.5-0.9 0.6-1.0 0.1 0.2 0.05 0.05 0.1 0.08 / 2.15 Others

 

CONTACT US

Chongqing Lanren Aluminium Co.,Ltd

0086 15823179208
Yanshui Dang, Xinghu Village, Nanping Town, Nanchuan District, Chongqing City, China(408422)

Chongqing Lanren Aluminium Co.,Ltd